Limited Edition Ethno Style | Floor Tiles - 11 Pack of 30.5cm x 30.5cm

• easy to cut to size, apply and reposition during application
• suitable for flat, hard and clean surfaces (e.g. flat floor tiles)
• self-adhesive
• easy to wipe clean 
• real looking designs with different structure and finishes
• for DIYers that want to save time & money on flooring
• an ultimate solution for low traffic areas

Important:If your subfloor is not listed below, please contact us for advice before you purchase

Subfloors which are suitable for the Classic Floor Tiles:

1. (floating) screed
2. Glued PVC floor
3. Polished concrete
4. Smooth, jointless wooden floor. Caution: should be degreased and neutralised with water
5. Ceramic tiles. Caution: the ceramic tiles should have a smooth surface and the joints should not be wider than 3mm.

Subfloors which are not suitable for the Classic Floor Tiles:

1. Floating floors (Laminate, Click Vinyl, Parquet)
2. Linoleum
3. Smooth surfaces (e.g. carpets)
4. Floors with heating
5. Outside
6. Floors exposed to high temperature or permanent direct sunlight
7. Floors exposed to permanent moisture
8. Dirty and dusty floors

For a successful installation you will need:

• craft mat
• metal edge ruler
• tape measure
• craft knife
• pen

Save time and order from our carefully selected tools.

If you would like to know more about these tiles we recommend that you read our FAQs.

Watch this short video for more details about the tiles and how to install them.

This is how you install the self-adhesive floor tiles. Make sure that you follow all instructions carefully.

1. Place the floor tiles in the room at least 48h before application at room temperature (20-22°C)
2. Fix any cracks or chips in existing tiles before you start
3. Clean the floor thoroughly removing any dirt or grease
4. Dry the floor
5. Remove the backing paper
6. Apply the tiles by pressing it down firmly with your hands. Press in the middle first and then the edges. Optional: Use an unused paint roller for a firmer pressing. Make sure that edges are butted together
7. The tiles can be cut to size. Mark the back with a pen and then score your mark with a craft knife
8. Bend to snap the score
9. Allow 24h for the adhesive to bond

• Wait 5 days before cleaning the Classic Floor Tiles for the first time
• Clean the tiles regularly. They can be damp-wiped with a light detergent
• Vacuum cleaners and brooms are fine to use
• Take care with sharp objects
• Avoid standing moisture