Delivery - NZ: FREE* for reward members, all others from $7.50, AUSTRALIA: from NZ$15.

Shipping Policy


Bundle Deals - Tools

Get all the tools you need for your DIY vinyl installation. Buy & Save with our tool bundle deals.

Edge Trims for Wall Tiles

Complete your self-adhesive wall tiling job with smart accessories.

Vinyl Home -Gift Card

Shopping for someone else? Treat them with a DIY gift card and let them select their favourite the design.

Equip yourself with the right tools and take your DIY project to the next level!



Vivid Stars | Wet Room Vinyl Wall Tiles - 6 Pack 30.5cm x 30.5cm

11 items left

Product Details

Package Size: 6 Sheets

Sheet Size: 30.5cm x 30.5cm
Thickness: 1.4mm
Coverage: 0.55m2
Colour: Beige
Material: Wall tile made of PVC, Protruding, self-adhesive film, Release paper

Clearance Item:

This product will not be restocked when sold out. Please note that we do not accept any returns for this item for change of mind.

Vivid Stars | Wet Room Vinyl Wall Tiles feature a stylish star design. Easily apply them to ceramic wall tiles for an instant, attractive update. For use in wet rooms, these tiles have a backside film with protruding edges for watertight joints. When installing in wet rooms, seal the outer edges with silicone.

    Wall tile calculator

    • Divide the area you want to cover in rectangular sections as pictured. Make all measurements in mm.
    • We recommend to add a minimum of 10% wastage to your order. Select your wastage from the drop down menu. As a rule of thumb larger tiles and a more geometric look (e.g. the hexagon tiles that overlaps both horizontally and vertically) require a higher waste percentage.
    • The calculator base the calculations on the tiles being applied in the direction as pictured of the single tile sheet. If you intend to position your tiles in the opposite direction, simply swap width with height.
    Wall tile calculator
    Section A
    Width mm
    Height mm
    Section B (Optional)
    Width mm
    Height mm
    Section C (Optional)
    Width mm
    Height mm
    Section D (Optional)
    Width mm
    Height mm
    Add Wastage (recommended)
    Get the Vivid Stars tiles?
    You need 0 x 6-packs (0 sheets) to cover 0.0 m2 with no wastage


    • can be applied on top of ceramic tiles
    • steam resistant
    • no grout needed
    • easy to wipe clean
    • just cut, peel and stick

    If you are unsure of what design to choose for your project, we recommend that you order a sample first.

    Where to install

    Important:If your installation surface is not listed below, please contact us for advice before you purchase.

    Recommended surfaces

    Wet room vinyl wall tiles can be installed on smooth and undamaged surfaces like:

    • painted gib (after a 21-day curing time for fresh paint)
    • smooth ceramic tile
    • wall panel (acrylic)
    • metal

    Not suitable surfaces

    It is not recommendedto install wet room vinyl wall tiles on the following surfaces:

    • porous wood
    • relief ceramic tiles
    • textured wallpaper
    • unpainted gib
    • floors
    • bench tops
    • ceilings
    • brick
    • stone

    Tools Required

    For a successful installation you will need:

    • grease remover (e.g. sugar soap)
    • cutting mat
    • metal edge ruler
    • tape measure
    • craft knife
    • pen
    • level

    Save time and order from our carefully selected tools.

    If you would like to know more about these tiles we recommend that you read our FAQs.

    Watch this short video for more details about the tiles and how to install them.


    1. Before you start: Place the wet room vinyl wall tiles in the room at least 48h before application at room temperature ( 20-22°C)
    2. Prepare the application surface: The surface must be clean, even, free of dust, oil and grease, and permanently dry. Level out any unevenness with a filler.
    3. Application: Peel off the backing paper from the overhanging backing film and stick the tile to the wall. Glue the next wall tile overlapping the overhang of the previous tile edge to edge.
    4. Cut to size: If necessary, cut the wall tiles to size. To do this, position a rule and run the cutter knife along it two or three times.
    5. Seal: The backside film is protruding on two sides and ensures watertight joints.Be sure to seal all outer edges with silicone, especially in wet rooms. This prevents moisture from penetrating. Air the room well afterwards.


    Clean the tiles with a light, commercially available liquid cleaner or soapy water. Then rinse thoroughly with clear water.
    Caution: Avoid acetone, mineral spirits and direct heat at all costs.

    Customer Reviews

    Be the first to write a review